Description:
Bags filling sealing packing machine VFFS powder screw auger measuring filling film forming filler sealer bagging equipment
Model GP-VFS250
Packing speed 30-60bags/min
Bag-making size (L)80-350mm(W)80-250mm
Filling range 150-2000ml
Film width 180-520mm
Packing materials OPP/CPP PET/PE
Film thickness 0.04-0.08mm
Air consumption 0.36m3/min 0.6MPa
Power supply AC220V 50Hz 3.5kw
Machine dimensions (L)1600×(W)1050×(H)1750mm
Machine weight 680kg
Packing speed 30-60bags/min
Bag-making size (L)80-350mm(W)80-250mm
Filling range 150-2000ml
Film width 180-520mm
Packing materials OPP/CPP PET/PE
Film thickness 0.04-0.08mm
Air consumption 0.36m3/min 0.6MPa
Power supply AC220V 50Hz 3.5kw
Machine dimensions (L)1600×(W)1050×(H)1750mm
Machine weight 680kg
For a vertical form-fill-seal the film approaches the back of a long hollow conical tube, which is called the forming tube. When the center of the plastic is near the tube, the outer edges of the film form flaps that wrap around the conical forming tube. The film is pulled downward around the outside of the tube and a vertical heat-sealing bar clamps onto the edges of the film to create the "fin Seal", bonding the film by melting the seam edges together.
To start the bagging process, a horizontal sealing bar creates the "Bottom Seal" by clamping across the bottom edge of the tube, bonding the film together, and cutting off any film below. This sealing bar can be on a fixed height, which is called an intermittent sealing process. Faster systems include a sealing bar that moves down with the bag while sealing. This is called a continuous process. The product is either pre-measured by a multi-head weighing system or the sealed tube end is then lowered onto a precision weighing table and the product to be bagged is dispensed through the long conical tube in the center of the bag. When the gross weight of the product-filled bag is reached, filling stops, and the horizontal sealing bar seals the top of the bag, simultaneously forming the bottom of the next bag above. This bag is then cut off from the tube and is now a sealed package, ready to advance onward into the product boxing and shipping processes. Multi-head weigher portioning into VFFS vertical form-fill-seal machine system, packaging shredded cheese.
During the final sealing process, the bag may be filled with air from a blower or from an inert gas supply such as nitrogen. Inflating the bag helps reduce the crushing of fragile products such as potato chips, while inflating with inert gas helps drive out oxygen and retards the growth of bacteria that would spoil the product. Other product finishes such as hole punching for retail hanging racks will be done concurrently or just after the "Top Seal" is made.
To start the bagging process, a horizontal sealing bar creates the "Bottom Seal" by clamping across the bottom edge of the tube, bonding the film together, and cutting off any film below. This sealing bar can be on a fixed height, which is called an intermittent sealing process. Faster systems include a sealing bar that moves down with the bag while sealing. This is called a continuous process. The product is either pre-measured by a multi-head weighing system or the sealed tube end is then lowered onto a precision weighing table and the product to be bagged is dispensed through the long conical tube in the center of the bag. When the gross weight of the product-filled bag is reached, filling stops, and the horizontal sealing bar seals the top of the bag, simultaneously forming the bottom of the next bag above. This bag is then cut off from the tube and is now a sealed package, ready to advance onward into the product boxing and shipping processes. Multi-head weigher portioning into VFFS vertical form-fill-seal machine system, packaging shredded cheese.
During the final sealing process, the bag may be filled with air from a blower or from an inert gas supply such as nitrogen. Inflating the bag helps reduce the crushing of fragile products such as potato chips, while inflating with inert gas helps drive out oxygen and retards the growth of bacteria that would spoil the product. Other product finishes such as hole punching for retail hanging racks will be done concurrently or just after the "Top Seal" is made.
The feeding of material and cutting of the bag/pouch can be determined either by pouch length, or by indexing to an eyespot (photo registration mark), which is detected by a visual sensor. While single web systems are popular for food applications, the dual web four side seal system is often popular for IVD and Medical device products. Closely related is the horizontal form-fill-seal machine, which generally uses more floor space than a vertical system. Modern advancements in pouch forming technology have allowed for smaller and smaller Vertical pouch forming systems.
Many food filled packages are filled with nitrogen to extend shelf life. Food manufacturers are often looking for ways to improve their geographical reach or otherwise extending the shelf life of their product without the use of chemicals. Nitrogen filling is a natural means of extending shelf life. More and more manufacturers are choosing to create and control their own nitrogen supply by using an on demand nitrogen generators.
Basic description on model YX-398D VFFS Packaging equipment powder filling into bags bagging machinery :
Many food filled packages are filled with nitrogen to extend shelf life. Food manufacturers are often looking for ways to improve their geographical reach or otherwise extending the shelf life of their product without the use of chemicals. Nitrogen filling is a natural means of extending shelf life. More and more manufacturers are choosing to create and control their own nitrogen supply by using an on demand nitrogen generators.
Basic description on model YX-398D VFFS Packaging equipment powder filling into bags bagging machinery :
Bag sealing type for your refrerence:
Application for bags form fill seal equipment VFFS auger filling packing machine for powder :
this powder packing machine is suitable for automatic packaging powder materials like all kinds of flour ,washing powder, fine sugar,milk powder,glucose,seasoning,food additive,pesticide,and Chinese medicine.
Technical characteristics of auger filling packaging machinery for powder liquid detergent&milk food packaging:
1.Touch screen language can change as your requirement
2.Simens PLC clearly show the working state, handle direction and so on, simple operation directly.
3. Simens PLC system provide a stable work procedures.
4. It can stock ten dispose, fit to the change of the product packing fastly.
5. Using intellect thermostat, can control the temperature within 2 .
6. Adjust the seal position in the touch screen, do not need to stop the machine, deviation and so on, (more than 420 can choose the automatic deviation).
7. Cooperate with horizontal grain tooth type sealing, packing more firm, also can choose straight grain, twill. Cobwebbing, etc.
8. Use the CE installation standard, the protect standard can be IP65.
9.The packing function of a variety of bag type: such as: flat bags(pillow bag,three sides seal, four sides seal),solid bag(jack stand-up pouches, triangle bags), handbags, punching bags.
10.All kinds of punching shape can be made by our design for you.
11. To highlight your bags water chestnut is clear, our specially equipped with a dedicated pressure line device. Your product gas release, in each of your bags are fitted with a one-way vent valve.
12. Overweight products may affect the effect of the packaging, we have a material holding output device, it will lift up the heavy products to be completed package before the product distribution.
13.Product is too fluffy, too small bags, a shock device for you to solve problems.
14.If your packaging film is single-layer PE material, can also be matching special PE film special sealing device.
Technical parameters for auger filling machine for powder(in mm) :
2.Simens PLC clearly show the working state, handle direction and so on, simple operation directly.
3. Simens PLC system provide a stable work procedures.
4. It can stock ten dispose, fit to the change of the product packing fastly.
5. Using intellect thermostat, can control the temperature within 2 .
6. Adjust the seal position in the touch screen, do not need to stop the machine, deviation and so on, (more than 420 can choose the automatic deviation).
7. Cooperate with horizontal grain tooth type sealing, packing more firm, also can choose straight grain, twill. Cobwebbing, etc.
8. Use the CE installation standard, the protect standard can be IP65.
9.The packing function of a variety of bag type: such as: flat bags(pillow bag,three sides seal, four sides seal),solid bag(jack stand-up pouches, triangle bags), handbags, punching bags.
10.All kinds of punching shape can be made by our design for you.
11. To highlight your bags water chestnut is clear, our specially equipped with a dedicated pressure line device. Your product gas release, in each of your bags are fitted with a one-way vent valve.
12. Overweight products may affect the effect of the packaging, we have a material holding output device, it will lift up the heavy products to be completed package before the product distribution.
13.Product is too fluffy, too small bags, a shock device for you to solve problems.
14.If your packaging film is single-layer PE material, can also be matching special PE film special sealing device.
Technical parameters for auger filling machine for powder(in mm) :
Packing speed
|
30-60bags/min
|
Bag-making size
|
(L)80-350mm(W)80-250mm
|
Filling range
|
150-2000ml
|
Film width
|
180-520mm
|
Packing materials
|
OPP/CPP PET/PE
|
Film thickness
|
0.04-0.08mm
|
Air consumption
|
0.36m3/min 0.6MPa
|
Power supply
|
AC220V 50Hz 3.5kw
|
Machine dimensions
|
(L)1600×(W)1050×(H)1750mm
|
Machine weight
|
680kg
|
spare parts list for model GP-VFS250 Powder filled into bags bagging machines:
horizontal sealing heating tube
|
4 pcs
|
vertical sealing heating tube
|
2 pcs
|
socket head wrench 4-10mm
|
1 set
|
open spanned 14-17
|
1 pc
|
open spanned 8-10
|
1 pc
|
Synchronous belt transport membrane
|
1 pc
|
copper brush
|
1 pc
|
cut-off blade
|
1 pc
|
oiler 150ml
|
1 pc
|
Characters
|
1 pc
|
date coder instruction book
|
1 pc
|
Siemens servo driver instruction book
|
1 pc
|
Temperature controller instruction book
|
1 pc
|
The part constituting the packaging machinery powder packing model GP-VFS250
Machine structure:
Powder materials:
Final sample products from our clients:
Wooden case packaging for powder packing machines model GP-VFS250
No comments:
Post a Comment