H type carton sealing machine fully automatic case top-bottom edges sides folding sealer equipment end packaging line​

Description:

H type carton sealing machine fully automatic case top-bottom edges sides folding sealer equipment end packaging line

Model:GP-50-1
Carton Size L200-730mm*W150-500mm*H150-720mm
Table Height Min.H500mm Max.H750mm
Packing Speed 8-10cts/min
Machine dimension L2800 * W1900 * H1550mm
Power supply 220V 50/60HZ 1.8KW
Air compressing 6-7kg
Adhesive tape width 48mm/60mm/72mm
Machine weight 450kg

The size of cardboard box is controlled by handle fixed position. It can be delivered automatically at moderate time. The hot melt case sealer is suitable for fully automatic assembly lines. The case sealing machine adopts hot melt glue and it can also be sealed with leather paper adhesive tape and BOPP adhesive tape.

Automatic carton flaps folding and automatic carton corner side sealing machine working together, make a "H" shape sealing.
According to the size of the carton, manually adjust the machine width and height, suitable for sealing different cartons.

Functions and features of H type carton sealing machinery:

1. According carton size, manually adjusting the width and height of the machine, simple, convenient, fast.
2. The machine adopts PLC control, simple operation, easy maintenance, stable performance.
3. For a variety of automatic folding carton sealing cap H-type, the upper and lower corners of carton sealing edge and automatically, smooth, fast and smooth, but also with supporting the use of automated packaging line.
4. Fold the front cover by carton sealing machine sealing machine into the 90-degree angle, box board by pushing the Edge Sealer.
5. Sealing beautiful, fast, labor-saving, high efficiency. 
6. Simple, economical and durable, safe, low failure rate.
Working Flow for the carton sealing process:

Manual Feeding Carton- -Automatic Flaps Folding-- Automatic Sealing Top and Bottom-- Automatic Pushing Carton Forward-- Automatic Sealing Carton Corner Side- Complete.

Malfunctions and solutions on carton erection sealing equipment:

Malfunction and Solution of the Sealer
Nr	Malfunction	Possible reason	Solution
1	Adhesive tape can  not be cut off	The reamer patch is not sharp enough. The reamer tine isjammed by the bond.	Change the reamer patch Launder the reamer patch
2	There is tail  after the adhesive tape  is cut off.	The reamer patch is not sharp enough.  There is stem on the reamer seating.  The pulling spring is too loose.	Check if the nut on the reamer  seating is too loose or not.  Lubricate the nut if necessary.
3	The adhesive tape  can’t stick to the carton  completely.	Main spring is too loose  and there is glue  on the axis of the roller.  The adhesive tape is disqualification	Adjust the pull of main spring  and clear up the roller.  Change the adhesive tape
4	The carton is locked  in the midway.	The nut on the pasting wheel  is too tight,  the height adjustment of the carton’s  transporting line is not suitable,  and the main spring is too tight.	Loosen the pasting wheel,  regulate the nut,  re-adjust the height  and loosen the main spring.
5	The adhesive tape  is cut down  during sealing.	The reamer patch protrudes  excessively long.	Lower the place  of the reamer patch.
6	The adhesive tape is  often off the track.	The pressure of the guiding roller  on the carton is not equal.	Re-adjust the space  of the guiding roller.
7	The adhesive tape is not on the central line.	The anti-retrorse wheel is broken.	Change the anti-retrorse.
8	There is abnormity  during the sealing.	There is dust on the axletree seating.	Clean the axletree  seating and lubricate.
9	There is jut  before sealing  and drape after sealing.	The speed of different straps is different, and the carton is not  at the proper place  when pushing into the machine.	Adjust each transporting line’s  pull to be consistent  so that the carton  can be put at the correct place.
10	There is drape  after sealing	the strain of adhesive tape is too large

Guarantee: for all the machine, it claims one year for guarantee.(Excluded from the warranty are problems due to accidents, misuse , misapplication, storage damage, negligence, or modification to the Equipment or its components. ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)
Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and test the machine and also training your worker to operating the machine (The time of train depend on you worker). The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for the technician USD50 per day. also you can go to our factory to do training.
After service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible. The cost should be in your account.(as above).

Semi automatic vacuum glass bottle filling machine for 10-5000ml liquid perfume 4 heads filler equipment vacuum filler semi-automática máquina llenadora de perfume

Description:

Semi automatic vacuum glass bottle filling machine for 10-5000ml liquid perfume 4 heads filler equipment vacuum filler semi-automática máquina llenadora de perfume

Model:GP-PF4H

Model:                                                      GP-PF4H
Air pressure                                              >0.7MPa
Pressure:                                                  0.55-0.65MPa
Air consumption:                                       0.3 m3 / min
Maximum bottle height:                            250mm
Maximum bottle diameter                         90mm
Minimum bottle diameter                          5mm
Production capacity                                  20-40 bottles / minute
Filling range                                              5-1000ml
Filling accuracy                                         ±1.5g
Noise                                                         70db (a)

Vacuum filling machine for filling perfumes and other water-based materials. This machine is filled with negative pressure and fixed liquid level. 
It is designed and developed on the basis of the semi-automatic vacuum filling machine approved by the customers. It is suitable for the filling of products with good fluidity such as various water agents and high foam products. 
The machine is compact and reasonable in design, simple in appearance, controlled by PLC, and draws the product into the container with continuous vacuum suction. When the product is filled into the outer tube of the filling head, the excess product is pumped back into the barrel, and the filling liquid The height of the surface is determined by the depth of the filling head into the container. Therefore, regardless of whether the filling container is consistent, the filling liquid level can be kept the same, the returning barrel is of medical grade, and the product in the barrel can be reused.

Product Features:

Negative pressure aspiration filling, product filling volume is measured by the liquid level.
It is equipped with casters for easy movement.
Applicable to glass bottles, or plastic bottles that are not easily deformed after vacuuming.
Easy to adjust, operate and maintain.

3. How to use
The working principle of the filling machine is to open the hand valve and connect it to the gas source. Put the glass bottle with the nozzle in the mouth of the nozzle, press the pneumatic switch, use the rising table to make the bottle straight, and the cylinder is tightened downwards. After tightening the mouth, the cylinder automatically returns to the original. The starting point, complete a tie loop.

Machine in stock:

Packaging & shipping:

Doypack standing up bag/pouch filling machine with different filling heads/nozzles

Description:

Doypack standing up bag/pouch filling machine with different filling heads/nozzles

Specifications of one heads liquid&paste filling machine: 
GP-BFH
VSpecifications of one heads liquid&paste jelly filling machine:
Voltage: 220/110V 50/60Hz Power: 27W 
Rated pressure :0.4-0 .6 Mpa 
Filling speed :20-35 bottles / min / head 
Filling precision: ≦ ± 1% 
Filling range : 250-2000ml 
Over dimension :160cm*44cm*37cm Weight :63kg

Introduction of spout bag filling machine:

1.Material 304 Stainless steel, absolutely adopts Pneumatic Filling, and suitable for Ointment
2.Total Pneumatic Paste Filling Machine ( total pneumatic, doesn't need electricity. ) 
The Model absolutely uses the Pneumatic Element. It is simple and reasonable in design, high in accuracy and easy in operation. Suitable for filling various kinds of highly viscous stuff, such as Jam, lobster, sauce, ketchup and so on
3.With no need for power supply, the machine is safe and with the personalized design, can mlobster sauceeet the modern enterprises' requirements

Feature of spout pouch liquid milk filling machine
1.Simple structure in linear type ,easy in installation and maintation.
2.Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3.High pressure double crank to control the die opening and closing.
4.Running in a high automatization and intellectualization,no pollution
5.Apply a linker to connect with the air conveyor ,which can directly inline with filling machine.
6.Filling valve controlled by a solenoid valve ,high filling accuracy.
7.Using a special three-way valve system that allows higher filling accuracy.
8.Pneumatic machines can be customized without power explosion-proof.
9.Magnetically driven gear pump head and motor without shaft ,do not worry about leaks or seal damage ,pump load is too high and burn out the motor

Double heads semi automatic pneumatic liquid filler spout bags front shot:

Specifications of one heads liquid&paste filling machine: 
Rated pressure :0.4-0 .6 Mpa 
Filling speed :20-35 bottles / min / head 
Filling precision: ≦ ±  1% 
Filling range : 250-2000ml 
Over dimension :160cm*44cm*37cm
Weight :63kg 
Principles and characteristics 
1.  The  paste  filling  machine  is  semi-automatic  piston  type developed  by  our  company,  filling  a  series  of high concentrations of fluids. It is through air cylinder to drive a piston  and  transfer--valve’s  Three  Contacts  principle  to extract  and  to  split  out  the  highly  concentrated material, and  by magnetism-reed  switch  to  control  air  cylinder’s travel, then can adjust the filling volume. 
2.  This device is simple and reasonable in structure, easy to 
understand, with high accuracy. 
3.  Pneumatic  part  adopts  Germany  FESTO  and  Taiwan AirTac pneumatic components. 
4.    Filling volume and filling speed can be arbitrarily adjusted with high filling accuracy. 
5. Filling  head  adopts  anti-drip,  anti-  drawing  and  lifting devices. 

Sample pictures:

Packaging and shipping:

Automatic cream paste bottle filling machine with round table bottles unscrambler single head cream filler automated conveyor system

Description:

Automatic cream paste bottle filling machine with round table bottles unscrambler single head cream filler automated conveyor system

Model:GP-AFM01

Fillingvolume(ml) 0-50 (customized)
Productivity(b/h) 500-1000
Filling speed Adjustable 
source pressure 0.4-0.8mpa
Weight: 320kg

The automatic cream & paste filling machine adopts programmable logic controller (PLC) human machine interface(HMI) technology, equipped with the imported photoelectric track switch track switch from Korea, which is suitable for filling ointment products in the industries such as ointment, oil products, syrup, flavoring paste, fruit juice and etc. 

The single (double) head automatic ointment filling machine adopts programmable logic
controller (PLC) humanand  machine interface technology,equipped with imported photoelectric trackswitch from Korea, which is suitable for filling ointmentproducts in the industries such as ointment,oil products, syrup, shampoo, bechamel and fruit juice etc.
The filling nozzle will be automatically insertedinto the bottle to carry out the filling and then rapidly ascend, which can reduce the air bubbles.
The product integrates electric and pneumatic functions into one,with reasonable design, stable performance, accurate quantity, glass table surface,automatic bottle feeding, steady operation without noise,electrics peed control to the filling speed and filling volume and convenient maintenance and cleaning.
The new typefilling equipment is best choice for the realization of automatic production.

Characteristics
1.Beautiful and novel appearance,compact structure.
2.The main travel of the whole machine adopts pneumatic control.The filling adopts pedal control with convenient and labor-saving operation and adjustment.
3.The whole machine is provided with tank,table and bottom pulley etc.with bright shape and convenient operation 
4.No dripping when it is stopped.
5.All the parts,shield shell and table plate that contact the materials are made of SUS316L stainless steel.
6.pneumatic control is adopted with convenient operation and maintenance.Installed with travel indicator with accurate measurement and stepless speed adjustment.

Application scope:

Guarantee: for all the machine, it claims three years for guarantee.(Excluded from the warranty are problems due to accidents, misuse , misapplication, storage damage, negligence, or modification to the Equipment or its components. ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)
Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and test the machine and also training your worker to operating the machine (The time of train depend on you worker).
The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for the technician USD50 per day. also you can go to our factory to do training.
After-sale service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible.The cost should be in your account.(as above).

3-in-1 Aerosol Filling Machine semi automatic pneumatic aerosol filling machine

Description:

3-in-1 Aerosol Filling Machine semi automatic pneumatic aerosol filling machine

Model:GP-3in1AF

Dimension:1280*730*1880mm
Applicable valve: 1 Inch(can be customized)
Diameter of the inhalator jar: φ 35- φ 70mm(can be customized)
Height of the inhalator jar :80-315mm
Filling precision: ≤± 1%
Filling amount:300ml-500ml
Filling precision of rejecting preparation : ≤± 1%
Producing ability :300-1200 cans/hour(depends on the volume per can)

Aerosol filling machine, in the design of the contents will be semi-automatic filling machine, semi-automatic sealing machine, semi-automatic filling machine propellant (including booster pump) combined with the completion of a work platform, and can be any single work. Any two machine interaction work, can be adjusted.

Contents of various liquid filling machine for filling medium has good self-priming function. Contains a certain viscosity and concentration of media (such as paints, polyurethane foam sealant for black and white material); semi-automatic sealing machine sealing quality and reliable, and easy to install, larger cylinder seal, the gas pressure 0.25-0.3MPa when the source can also be sealed ; semi-automatic filling machine mainly used for propellant

In the filling (c butane gas, Freon, dimethyl ether and 134a, etc.) no corrosion can be liquefied. Main seals are imported. Applicable to all kinds of aerosol filling valve. Booster pump with large capacity two-way booster. So filling fast, accurate.

The machine small footprint, simple operation. A worker can only complete the whole process of production (labor intensity of production with other domestic manufacturers of semi-automatic sealing machine operator rather), is the preferred aerosol manufacturers.

Valve crimping:

Liquid filling:

Gas filling:

Adjust to fit for different diameter cans

Technical parameters:
For valves: 1 " (25.4 mm)
Contents of the filling volume (ml): 20,50,100,200,400,600,750
Contents of the input connector: 20 mm diameter stainless steel pagoda connector
Propellant filling volume (ml): 20,50,100,200,400,600
Propellant input connector: M22 * 1.5 Anti-teeth (for example, with standard 15KG, 50KG liquefied petroleum gas cylinder butt)
Filling accuracy: ± 1%
Aerosol cans for height (mm): 70-330
For aerosol can diameter Diameter (mm):: φ35 to φ65
Working pressure (MPa): 0.5-1.0
Maximum Air Consumption (m3/min): 1
Production capacity (cans / hour): 100 ml per tank filling of liquid propellant calculations, 1200 cans / hour
Packing size and weight (of 2): 1000 mm * 590 mm * 1560 mm, 190 kg; 440 mm * 340 mm * 825 mm, 40 kg

Normally the charging head is closed to guarantee no leakage.
When there are bottles under the charging heads, the valves will   open the charging heads and begin to charge air, so when there are no bottles under the charging heads, the charging heads will not charge
air into the bottle. It can avoid the demerit of air   charging without bottles under the 2 charging heads.
The working principle of charging machine is as follows.   Pressure increase pump transform the mixture of liquid  and gas into liquid form, then go to complementary pump for storage. When charging work starts, the liquid will absorbed   from complementary pump to quantity fix jar, then piston of the quantity fix jar fixes quantity to make sure the precision   of the charging task. Quantity fix jar adopts 316L stainless steel,which is anti-corruption with long duration and precise quantity fixing.  You should change platform and gas quantity adjustment when produce different specs.
There are scales on quantity fix jar and filling part. You can change the   quantity by screw the hand wheel to a proper position.
The machine is controlled by gas, which is safe and explosion-proof.  Main characteristics of its function Save manpower, cover small area.
The equipment has low investing cost. but has high output. Fill, sealing   and charging are a trinity.

Application scope:

The production line has been widely used in food, medicine, health, automotive, environment, fire and aerosol cosmetic products packaging supplies, such as: mousse, hair spray, air fresheners, insecticides, disinfectants, fire extinguishing agents, carburetor cleaner ....

Testing final samples:

Wooden case packagin for shipment:

Q1. Your company is a trading company or manufacturer / factory?
Our company is a manufacturer / factory. Our factory is in Bai Yun District, Guangzhou, China. Welcome to visit our factory at any time !

Q2. What machines can your company produce?
We can produce all kinds of sachets packing machines, bottles / jars filling machines, sealing machines, capping machines, labeling machines and coding machines, for foods, drinks, cosmetics, chemicals, medicines, agricultural products, etc. We can also assemble our machines to be various automatic production lines. And, our machines can be customized, we can make machines according to our clients’ requests and their products.

Q3. What materials of your machines are made of ?
According to our clients’ different requests, our machines are made of high class stainless steel 304, stainless steel 316 or 316 L, carbon steel, Al alloy, etc.

Q4. What brands of the electronics and pneumatic parts your machines adopt?
According to our clients’ different requests, we can use both domestic brands, joint venture brands and world famous brands, such as, SIEMENS, SCHNEIDER, MITSUBISHI, TAMAGAWA, PANASONIC, SMC, AIRTAC, SICK, OMRON, SUNX, RED LION, and so on.


Q5. What power voltage do your machines work with?
Usually, our machines work with AC220V 1 phase, 50/60Hz, or AC380V 3 phases, 50/60Hz. But, we can also make the machine with the power voltage our clients required, such as, AC110V, AC240V, etc. Please tell us, what is the exact power voltage available in your city before you purchase our machines.

Q6. Do your machines work with compressed air?
Yes, some of our machines have to work with compressed air, the standard is, 0.6MPa to 0.8 MPa, consumption is various from 0.2 to 0.45 CBM per minute depends on the sizes of the machines. Usually, the users have to prepare an air compressor by themselves in their workshop.

Q7. What price terms your company can offer?
Because we are manufacturer / factory, usually, we offer EXW or EX-Factory price, of course, we can also offer FOB, CNF or CIF price.

Q8. What is the payment term your company accepts?
Usually, we accept T/T or in cash, 30% of the total payment as prepayment / deposit, the remaining 70% will be paid off before we deliver the machines. 

Q9. How long it will take if I put an order of your machines?
The delivery date depends on the sizes and complexity of the machines you order, various from 5 to 50 working days after we receive the prepayment / deposit from our clients.

Q10.  How do you pack your machines before transport / shipping?
Firstly, we clean the machines with anti-rust oil / grease, then, we wrap the machines with anti-moisture plastic film tightly, finally, we pack the machines with solid wood or timber cases that suitable for long distance or sea way transportation.

Q11. Do you provide the maintenance service?
Yes, we provide maintenance services, because regional difference, we can provide you the services by Email, telephone, express or internet online tools.

Q12. Is there a warranty and which period of validity does it cover?
We provide one year warranty for all of our machines, the validity time is from the day on which the machines leave our factory to your factory in one year. Pay 5% fee, can upgrade to two year warranty.

Q13.  If any part of the machines broken, how we can get the new replacements?
During the warranty period, if any part broken because of the quality defect or unqualified process, we will send the new replacements to you at our expense. If it exceeds the warranty term, or caused by users’ unreasonable operations, or irresistible factors, or any change unauthorized by our company, the users will have to pay for the new replacements.