Description:
18 heads beer crown caps bottle capping machine high speed
Model:GP-18HC
18 crown capping machines are manufactured by German company technology, with a production capacity of up to 30,000 bottles per hour. The gland head is equipped with an overload protection device. When the bottle is too high, it can be automatically unloaded to prevent broken bottles. The lower cover channel adopts advanced flip cover. The device is flipped, and there are multiple automatic control cover compartments and lower cover slots with an electronic coverless detection system, which automatically controls the speed of the cap feeder and the whole machine, and stops the sorting wheel and the coverless host.
The capping machine adopts an open gland head for all-round cleaning, and there is no lubricating oil inside the gland head.
The capping machine adopts an open gland head for all-round cleaning, and there is no lubricating oil inside the gland head.
18 heads crown capping machine:
18 pressing heads:
Pressing mechanism drawing:
Magnetic crown caps turntable:
I. The product introduction:
18-head capping machine, suitable for round and various shapes of glass bottles for capping (crown cap), adopting frequency conversion speed regulation, the production capacity can be adjusted from 30000P/H-36000P/H, stable operation and convenient maintenance. After replacing a small number of parts and making appropriate adjustments, the glass bottles of different heights and diameters can be capped for high versatility and wide application range.
18-head capping machine, suitable for round and various shapes of glass bottles for capping (crown cap), adopting frequency conversion speed regulation, the production capacity can be adjusted from 30000P/H-36000P/H, stable operation and convenient maintenance. After replacing a small number of parts and making appropriate adjustments, the glass bottles of different heights and diameters can be capped for high versatility and wide application range.
II.Technical characteristics and parameters:
1. Product model name: 18 automatic capping machine
2, the number of gland heads: 18
3, production capacity: 30,000 bottles / hour
4. Applicable bottle diameter range: Φ65-Φ80 mm
5, applicable bottle height range: 182-282 mm
III.Installation
The machine should be mounted securely on a concrete foundation and the conveyor chain should be connected to the same line on the other machine.
After the machine is installed, check whether the parts are loose or fall off. For the friction part of the activity, it is necessary to add enough lubricating oil to apply grease to the gear meshing teeth. Then turn on the power, the machine must be rotated clockwise, not reversed, otherwise it will damage the machine. The cover hopper should also be rotated clockwise. If a special sound or moving parts are stuck, stop immediately, check the cause, and drive after troubleshooting.
1. Product model name: 18 automatic capping machine
2, the number of gland heads: 18
3, production capacity: 30,000 bottles / hour
4. Applicable bottle diameter range: Φ65-Φ80 mm
5, applicable bottle height range: 182-282 mm
III.Installation
The machine should be mounted securely on a concrete foundation and the conveyor chain should be connected to the same line on the other machine.
After the machine is installed, check whether the parts are loose or fall off. For the friction part of the activity, it is necessary to add enough lubricating oil to apply grease to the gear meshing teeth. Then turn on the power, the machine must be rotated clockwise, not reversed, otherwise it will damage the machine. The cover hopper should also be rotated clockwise. If a special sound or moving parts are stuck, stop immediately, check the cause, and drive after troubleshooting.
Application scope:
http://gearpackaging.com/
Cellphone:+86-188-1682-5234
Telephone:+0769-8270-8461
Skype:Gearpacakaging Tony
E-mail:gearpacking@gmail.com
No comments:
Post a Comment