Hot melt glue plastic label applicator labeling machine semi automatic Plastic bottles glass container paper pipes HMA glue wrap labeller

Description:

This semi automatic hot melt glue plastic label applicator labeling machine is workable to apply opp, pet or pvc labels onto the bottles or cans. It is widely used in the beverage and food industries.
Hot melt glue plastic label applicator labeling machine semi automatic Plastic bottles glass container paper pipes HMA glue wrap labeller
Model GP-HMLS10
Suitable label length 105 - 550mm
Applicable label width 50 - 290mm
Workable bottle diameter 30 - 160mm
Workable bottle height 50 - 320mm
Labeling speed 8 - 23 pcs/minute
Labeling accuracy ±1.0mm
Power 2300W
Voltage 220v/50Hz, 110v/60Hz
Machine weight about 260kg
It’s one of hot melt labeling machine, be used on labeling on plastic bottle, glasses bottle, paper can, metal can and othe round pack. Can paste just on head and tail and or full of the back of labels. It Can use with several produce assembly line.
The adhesiver used for the machine to label the product with the labels is the hot melt one which is total different with the common non-dry sticker kind.

The Hot melt adhesive (HMA), also known as hot glue, is a form of thermoplastic adhesive that is commonly supplied in solid cylindrical sticks of various diameters, designed to be melted in an electric hot glue gun. The gun uses a continuous-duty heating element to melt the plastic glue, which the user pushes through the gun either with a mechanical trigger mechanism on the gun, or with direct finger pressure. The glue squeezed out of the heated nozzle is initially hot enough to burn and even blister skin. The glue is tacky when hot, and solidifies in a few seconds to one minute. Hot melt adhesives can also be applied by dipping or spraying.

In industrial use, hot melt adhesives provide several advantages over solvent-based adhesives. Volatile organic compounds are reduced or eliminated, and the drying or curing step is eliminated. Hot melt adhesives have long shelf life and usually can be disposed of without special precautions. Some of the disadvantages involve thermal load of the substrate, limiting use to substrates not sensitive to higher temperatures, and loss of bond strength at higher temperatures, up to complete melting of the adhesive. This can be reduced by using a reactive adhesive that after solidifying undergoes further curing e.g., by moisture (e.g., reactive urethanes and silicones), or is cured by ultraviolet radiation. Some HMAs may not be resistant to chemical attacks and weathering. HMAs do not lose thickness during solidifying; solvent-based adhesives may lose up to 50-70% of layer thickness during drying

General adhesive properties
Open time: the working time to make a bond, where the surface still retains sufficient tack, can range from seconds for fast-setting HMAs to infinity for pressure-sensitive adhesives
Set time: time to form a bond of acceptable strength
Tack: the degree of surface stickiness of the adhesive; influences the strength of the bond between wetted surfaces.
Surface energy: which influences wetting of different kind of surfaces.
Product Feature for hot melt glue labeling machine:

1. Easily change bottle shape and label, no need to change any part, can be finished in 5 minute. Through simply set up by one button, equipment can finish changing between paste just on head/tail and the full(just for overlapping can save paste)
2. Operator just need to put labels into label warehouse, photoelectric testing automatically, taking label, pasting, finishing stick in one second by equipment
3. There is automatic temperature controller inner the equipment to keep paste in a normal temperature. Silicon control be used can sure paste temperature more accurate, and can save power to 50%
4. Thickness of paste can adjust at 0.05-0.15mm freely. Accurate mixing device can save paste be using.
5. Improved technology, make labeling on label and can more tight, nice look and flat, even for a bit diameter soft and thin wall can, also can stick continuously very good.
6. Vacuum inhale board will prepare the second label when equipment are sticking the front one, that to sure no double labels will be submit in same time

Sample labeling result by hot melt glue labeling machine,paper round bottle,container,labeler applicator

Our Services
1. We will send you English user manual of the machine after you get our machine
2. There will be video show you how to operate the machine
3. We can send technician abroad to help you install and adjust the large machine if needed
4. Your contact will be replied within 24 hours if there is any question
5. Warranty: 1 year (we will replace the main part for you freely within 1 year, such as motor)
FAQ
Q: Are you a factory or a trading company?
A: We are direct factory and have rich experience, knowledge in the field and also have an organized skillfull working team. Our main products are Filling and Sealing Machine, Capping machine, Bottle Labeling machine, Horizontal Sticker Labeling Machines and so on.
Q: How can I know your machines works well?
A: Before delivery, we shall test the machine's working condition for you.
Q: How can I know your machine is designed for my product?
A: You can send us samples of your product and we test it on machine.
Q: Do you have machine in stock?
A: We have standard machine in stock, which means sui for common size product. For some special bottles or customized function, we need some time to produce.

http://gearpackaging.com/

Contact:Tony 

Cellphone:+86-188-1682-5234 

Telephone:+0769-8270-8461

Skype:Gearpacakaging Tony

E-mail:gearpacking@gmail.com