Description:
Semi automatic plastic vacuum forming machine toothpaste blister food tray box plate vacuum former equipment
Model:GP-SP48S
Length : 560mm Width: 610mm Height:150mm
Spead: 200-300/ hour(accordance with product figure and thickness)
Electric cooker power: 12.5 KW
Air Compressor machine: 4L/S Voltage:220v - 240 v/ AC380V 50Hz
Machine Size: L 1600 ×W720 ×H 1400mm Weight :600kg
Packing: N.W: 600KGS G.W: 630KGS CBM: 2.8 CBM
Spead: 200-300/ hour(accordance with product figure and thickness)
Electric cooker power: 12.5 KW
Air Compressor machine: 4L/S Voltage:220v - 240 v/ AC380V 50Hz
Machine Size: L 1600 ×W720 ×H 1400mm Weight :600kg
Packing: N.W: 600KGS G.W: 630KGS CBM: 2.8 CBM
Forming Moulds Copper mould + PVC Plastic Sheet = Forming finished product
Features:
1. Control system: The central integration control system, let feeder →heat →forming →cooling→ out of mould →cutting as an automatic production line. This machine adopts fittings make sure taht the machine has high quality.
2. The heater control: The heater is made by stainless steel to avoid the same model machine which made by iron creates oxidizing iron fall down to material and make products useless.
3. Temperature control system: Infrared ray heating ceramic tile and independent control system ensure be heated even, inside place heat preservation material reduce calories lost and save energy sources more than 40% compare with common machine
4. Cold breeze system: Have cooling water machine and spray fog breeze cold system no vibration and residual wind, expedite produce speed.
5. Vibrate to take off from mold: Can adjust 0~9 times, twice vacuum forming make sure the blister no transmutation and easy to break off from mold.
6. Twice vacuum forming: Inside place twice vacuum forming make the difficult material easy to form and increase products quality.
7. Alarm system: Have the product quantity counter; when the plank is full it will be alarm.
8. Control methods: Manual and auto methods can be chose easy to operate the machine.
9. Automatic cutting: Adopt no pole air cylinder drive a razor come-and-go to cut the material. Electric synchronously adjust up mold.
1. Control system: The central integration control system, let feeder →heat →forming →cooling→ out of mould →cutting as an automatic production line. This machine adopts fittings make sure taht the machine has high quality.
2. The heater control: The heater is made by stainless steel to avoid the same model machine which made by iron creates oxidizing iron fall down to material and make products useless.
3. Temperature control system: Infrared ray heating ceramic tile and independent control system ensure be heated even, inside place heat preservation material reduce calories lost and save energy sources more than 40% compare with common machine
4. Cold breeze system: Have cooling water machine and spray fog breeze cold system no vibration and residual wind, expedite produce speed.
5. Vibrate to take off from mold: Can adjust 0~9 times, twice vacuum forming make sure the blister no transmutation and easy to break off from mold.
6. Twice vacuum forming: Inside place twice vacuum forming make the difficult material easy to form and increase products quality.
7. Alarm system: Have the product quantity counter; when the plank is full it will be alarm.
8. Control methods: Manual and auto methods can be chose easy to operate the machine.
9. Automatic cutting: Adopt no pole air cylinder drive a razor come-and-go to cut the material. Electric synchronously adjust up mold.
Mould picture:
Samples pictures:
Main Application:
This type machine can be used for plastic film for all kinds, such as toys, hardware, food, electronics, medicine, with a transparent film coating repacked in a board, form a seal packing.
This type machine can also produce plastic ceiling panel, cake boxes, lunch boxes, automobile materials and sanitary materials etc, which can be produced with three-dimensional relief pattern like 3D advertisement products.
This type machine can be used for plastic film for all kinds, such as toys, hardware, food, electronics, medicine, with a transparent film coating repacked in a board, form a seal packing.
This type machine can also produce plastic ceiling panel, cake boxes, lunch boxes, automobile materials and sanitary materials etc, which can be produced with three-dimensional relief pattern like 3D advertisement products.
Suitable material: PVC, PET, PP, PC, ABS, PS, EPS, HIPS, LDPE, HDPE and all thermoplastic sheet.
Wooden case packaging:
Contact:Tony
Cellphone:+86-188-1682-5234
Telephone:+0769-8270-8461
Skype:Gearpacakaging Tony
E-mail:gearpacking@gmail.com
Thanks for the useful information. Your article is beneficial for us and those who are searching for food tray packaging machine for plastic food tray online
ReplyDelete