Dual Color Automatic Straw Making Machine double color plastic tube instant straw two color straw making machine equipment

Description:

Dual Color Automatic Straw Making Machine double color plastic tube instant straw two color straw making machine equipment.

    This line is composed of head unit, cooling system, traction device, with a variety of specifications such as single color extrusion, two color and two color co-extrusion, three color extrusion, etc.
Characteristics
      1. Wide application: drinking straw, candy bar, pen tube, cotten swab stick, medical tube, all kinds of toys tube, etc.

      2. Easy to operate. One operator is enough to run the whole line

      3. Cut form: Diversified in cut-end: 90°/90°,90°/45°,90°/60°,45°/45°,60°/60°

      4. With stable output and wide range of color options. (single, two, three or multi-color stripes, straight or spiral)

This line is composed of head unit, cooling system, traction device, with a variety of specifications such as single color extrusion, two color and two color co-extrusion, three color extrusion, etc.

Characteristics

      1. Wide application: drinking straw, candy bar, pen tube, cotten swab stick, medical tube, all kinds of toys tube, etc.

      2. Easy to operate. One operator is enough to run the whole line

      3. Cut form: Diversified in cut-end: 90°/90°,90°/45°,90°/60°,45°/45°,60°/60°

      4. With stable output and wide range of color options. (single, two, three or multi-color stripes, straight or spiral)

Parameter

Color		single	Two	Three
Model		GP-011	GP-012	GP-013
Main parts	Main parts are: extruder, cooling water tank, vacuum shaping equipment, air compressor,  hauling cutting system, single color, two color or tricolor pipes can be realized.
Power supply	Main screw	380v ,3phase,50hz,7.5kw(VFD)
	Sub-screw	/	0.75kw	0.75×2kw
	Heating	7kw	9.56kw	12kw
	Hauling motor	0.75kw(VFD)
	Cutting motor	0.75kw(VFD)
	Total power	16.5kw	20kw	22.5kw
Temperature Controller		5sets	8sets	11sets
Electric control cabinet		1set	1set	1set
Automatic Counting Device		1set	1set	1set
Way of Hauling		By rubber roller
Way of cutting		Rotatory cutting
Cooling water tank	Usually 3.5m, can be adjusted updown, right left, forward backward.
Option	Vacuum pump (0.75kw)		Air compressor (2kw)
Specification of Pipe	Material	PP PE etc.
	Diameter	2mm~13mm
	Length	Customizable
	Speed	600~1000pcs/min
	Color	Single	Two	Three
	Straight or spiral strips	√	√	√
	Cutting End	90°/90°,90°/45°,90°/60°,45°/45°,60°/60
Machine dimension L×W×H		9m×1m×1.7mm	9m×1.5m×1.7m	9m×2m×1.7m
Weight of equipment		1000kg	1500kg	2000kg

 

Sample pictures of two color straws:

http://gearpackaging.com/

Contact:Tony 

Cellphone:+86-188-1682-5234 

Telephone:+0769-8270-8461

Skype:Gearpacakaging Tony

E-mail:gearpacking@gmail.com

One Colour Automatic Straw Making Machine Single color automatic plastic tube food drink beverage instant straw making production machine equipment

Description:

One Colour Automatic Straw Making Machine Single color plastic tube food drink beverage instant straw making production machine equipment

one color drinking straws extrusion line uses polypropylene (PP) as raw materials, with the use of masterbatches, after melting, extrusion, shaping, cooling, pulling, cutting, then produce transparent, one color, two color, and three color drink straws. It is composed of main body, tooling, cooling system, cutting machine, with a variety of models such as single color extrusion line, two color and two color co-extrusion line, three color extrusion line, etc.
Characteristics：
1. Wide application: Drinking straw, candy bar, pen tube, cotten swab stick, medical tube, all kinds of toys tube, etc.
2. Easy to operate. One operator is enough to run the whole line
3. Cut form: Diversified in cut-end: 90° /90° , 90° /45° , 90° /60° , 45° /45° , 60° /60°
4. With stable output and wide range of color options. (single, two, three or multi-color stripes, straight or spiral)
Parameters：

Color		single	Two	Three
Model		011	012	013
Main parts	Main parts are: extruder, cooling water tank, vacuum shaping equipment, air compressor, hauling cutting system, single color, two color or tricolor pipes can be realized.
Power supply	Main screw	380v ,3phase,50hz,7.5kw(VFD)
	Sub-screw	/	0.75kw	0.75×2kw
	Heating	7kw	9.56kw	12kw
	Hauling motor	0.75kw(VFD)
	Cutting motor	0.75kw(VFD)
	Total power	16.5kw	20kw	22.5kw
Temperature Controller		5sets	8sets	11sets
Electric control cabinet		1set	1set	1set
Automatic Counting Device		1set	1set	1set
Way of Hauling		By rubber roller
Way of cutting		Rotatory cutting
Cooling water tank	Usually 3.5m, can be adjusted updown, right left, forward backward.
Option	Vacuum pump (0.75kw)		Air compressor (2kw)
Specification of Pipe	Material	PP PE etc.
	Diameter	2mm~13mm
	Length	Customizable
	Speed	600~1000pcs/min
	Color	Single	Two	Three
	Straight or spiral strips	√	√	√
	Cutting End	90°/90°,90°/45°,90°/60°,45°/45°,60°/60
Machine dimension L×W×H		9m×1m×1.7mm	9m×1.5m×1.7m	9m×2m×1.7m
Weight of equipment		1000kg	1500kg	2000kg

Straw samples:

One color straws:

http://gearpackaging.com/

Contact:Tony 

Cellphone:+86-188-1682-5234 

Telephone:+0769-8270-8461

Skype:Gearpacakaging Tony

E-mail:gearpacking@gmail.com

Automatic pail honey peanut butter oil two nozzles weighing filling lids placer capping machine linear type 5 gallon liquid tub container bucket filler sealer line

Description:

Automatic pail honey peanut butter oil two nozzles weighing filling lids placer capping machine linear type 5 gallon liquid tub container bucket filler sealer line

Metering of filling:weight
Nozzle quantity:2heads
Accuracy:±0.2%
Weighing Range : 5-30kg
Filling Speed :120-150pcs/hour 
Air Supply :165L/min (5.8CFM)
Power Supply :110V 60HZ single phase(or customized as requested)
Dimension(mm) :1000x650x1450 
Weight :180kg

The two heads filling press capping machine includes mainly two machines: One is Model:GP-FC5G Two heads filler equipment ; the other bucket lids press capping machine with automatic caps feeding system.
Work flow of filling lidding machine fully automatic tub container filler line:
Automatic weighing filling capping line Model:GP-FC5Gworking process: Put pails manually ---Conveying automatically ----Locating & Filling automatically----Put Lids  automatically ------Lids Pressing automatically------Conveying automatically.

APPLICATION of bucket filling capping machine:

The Automatic Filling Line is suitable for Coating, paint, ink, adhesive liquid, hardener, resins,  dyes, washing liquid, glycerine, lubricant oil, edible oil, flavors, solvents, additives, pesticide, daily chemicals, diluter liquid  and a variety flowing liquid etc.
Painting/lubricants Filling Machine 10-20L Barrel Weighing Machine with powered conveyor
Features of filling machine:

1. Filling Method: Filling from top. 
2. Control Mode: Manual setting filling way, micro switch control.
3. Conveying Mode: Roller Type Conveying without motor
4. Own digital displaying filling quantity function, can finish multi-kinds filling quantity   setting. 
5. Automatic peeled, based on net weight filling function.
6. Own vacuum withdrawing function to avoid anti-drip.
7. With manual & automatic micro switch control system function.
8. Dual speed control function to prevent splashing.
9. With emergent treatment to avoid misuse and protect power-off.
10. With SUS316 material of inside pipeline, which is liquid contact part.
Application of 10kg automatic big lids buckets weighing filling caps falling press capping machinery automated line:
Weighing filling machine is made based on international technique, with filling and electronic weigh, electronic displaying functions.
5. corrosive liquid.
6. It is suitable for medium bucket filling of various kinds of viscous, non-viscous, corrosive and non-corrosive liquid.

Machine drawing:

Basic parameter of liquid filling capping machinery:
Model:GP-FC5G
Metering of filling:weight
Accuracy:±0.2% 
Weighing Range : 5-30kg
Filling Speed :120-150pcs/hour 
Air Supply  :165L/min (5.8CFM)
Power Supply  :110V 60HZ single phase(or customized as requested)
Dimension(mm)  :1000x650x1450 
Weight :180kg 

Basic parameter of weighing scale system in the filling machine:

Basic parameters
Display window	128*64LCD/OLED English character display
Scale interval	1、2、5、10
Number of scale interval	10000
Decimal place	0、0.0、0.00、0.000
Unit of weight	g, kg, t(gram, kilogram and ton)
Overall dimensions	159（W）x 167（D）x 81（H）mm
Product weight	About 1.2 kg
Performance index
Static accuracy class	OIML R76 Class III
Maximum signal input range	-3.6mV/V ~ 3.6 mV/V
Maximum sensitivity	1.5μV/d (the weakest filter) or 0.75μV/d (the strongest filter)
Input-end noise	≤0.5μVp-p (the weakest filter) or 0.25μVp-p (the strongest filter)
Zero drift	≤0.05μV（@ 0.02mV/V）
Temperature coefficient	≤10ppm/°C
Input impedance at load cell interface	≥20MΩ
Non-linear error	≤0.002%FS
A/D conversion rate	100 SPS(samples per second)

Plastic pail press capping machine  Model:GP-FC5G with powered conveyor
The lid hopper products are mainly used for open barrels, paint bucket, lubricating oil drums, drums, paint bucket, hand barrels (convenience barrels) Series: 4 liters, 5 liters, 10 liters, 12 liters, 18 liters, 20 liters Standard barrel cover essential tools. Widely used in barrels, cans, lubricants, coatings, chemicals, petroleum, grain and oil, and other liquid packaging industry essential supplies.
The capping machine is an important part of the production line, is to complete the capping of the heavy bucket, the capping machine is double gland to ensure that the gland is tight and the lid is closed after the gland. The capping machine is positioned under the gland plate. After positioning, the gland is gated and the gland is pressed and pressed.

Product Series
name:automatic press capping machine
weight:160KG
Standard size of capping head:¢ 34mm (can be customized)
capping range:4-20L
Dimensions:1000 (L) x 520 (W) x 1300 (H) (mm)
Control System:Electronic - pneumatic control
Material:Carbon steel spray frame, no motor roller conveyor
Capping:speed:(20L barrels) 120-150 barrels / hour;(4-10L barrels) 150-200 barrels / hour
Optional part for transfering materials from storage tank to filling station according to materials viscosity:


Bucket samples for filling capping machine

Notice on how to run the filling capping machine:
1) Unpacking
When unpacking the case, properly keep the packing list, qualification certificate, specification, and accessories and spare parts.
2) Installation instruction
The instrument should be securely mounted on the control panel of electric cabinet.
Installation place should be free from vibration source, taking sun-proof, high temperature prevention, freeze prevention, moisture proof and rain proof measures.
3) Wiring precautions
Each ground terminal should be well grounded, correctly connected and securely fixed.
The instrument should not share any distribution box, power socket and power lines (including ground lead) with interfering electric equipments as it would affect the performance of the instrument. If it is necessary, power filter should be added in the power circuit for isolation.
To prevent unnecessary interference, shorten length of sensor cables as much as possible and keep sensor away from power lines and control lines.
4) Precautions for use
To prevent negative phenomena such as over high and low voltage and waveform distortion, maintain power supply stability as much as possible.
To prevent instrument damage, NEVER press randomly, heavily and strike on instrument keypad or buttons.
To prevent personal injury or equipment damage, NEVER dismantle the instrument at will, whether in a power-on state or not.
The instrument allows for break-point memory and generally, after completing preset batch numbers, set manual/automatic switch under manual state before for next round of batching and then power off switch. See relevant sections for shutdown of break-point memory function.
5) Maintenance precautions
Never plug in or out the connectors on rear board or replace fuses and sensors in a power-on state.
To prevent misalignment or imbalance, instrument calibration or setting shall only be carried out by our company personnel or professional.
Do not clean instrument with organic solvents of HC, alcohol and ketone type, or with strong acid or alkali solution as it would damage instrument enclosure, panel and internal components.
No arbitrary repair or modification to the instrument is acceptable and, in case of equipment failure, please follow the operating instruction or contact with us, or otherwise no preferential after-sales service would be offered.
The equipment, if left unused, should be powered on at least once every month with a period of more than 1h, removing internal moisture.
Filling capping Machine in wooden packaging before ocean shipping:

http://gearpackaging.com/

Contact:Tony 

Cellphone:+86-188-1682-5234 

Telephone:+0769-8270-8461

Skype:Gearpacakaging Tony

E-mail:gearpacking@gmail.com

Dry tabacco cans vacuum seaming machine semi autoamtic herb nuts food metal tin plastic jar lid sealing equipment with Nitrogen flushing function

Description:

Dry tabacco cans vacuum seaming machine semi autoamtic herb nuts food metal tin plastic jar lid sealing equipment with Nitrogen flushing function

Model:GP-2NS45
can size diameter 50-100mm, height 60-180mm
production capacity 5-10cans/minute
gas source 0.6-0.8mpa
oxygen Residue 1.5-2.8%
power 1.5kw
voltage 220V 50HZ single phase
overall dimension 900x820x1600mm
weight 200kg

This semi automatic vaccum nitrogen flushing can sealing machine features good sealing quality, simple and compact construture, easy operation and maintenance,
light weight and low noise and so on. This machine is pneumatic type and it is easy to replace sealing moulds for different sealing diameters. 
Therefore it is widely used in foods, beverages,consumer products,chemicals and medicines and other inductries. 

Application scope:

Structure and performance description:

1, the appearance is unique and beautiful, using all stainless steel materials;Taking less space and more economic compared with automatic vacuum seaming machine;
2, the structure design is reasonable, can complete the vacuum and nitrogen filling independent and combined functions;
3, to achieve high standard packaging process requirements, to meet the enterprise production and national inspection standards;
4, using touch screen And PLC human-computer interaction system to achieve intelligent production and control.
Basic parameter of Model:GP-2NS45 tobacco cans vacuum seaming machine semi automatic metal tin sealing closing capping equipment:

can size     diameter 50-100mm, height 60-180mm
production capacity    5-10cans/minute
gas source    0.6-0.8mpa
power    1.5kw
voltage    220V 50HZ single phase
overall dimension    900x820x1600mm
weight    200kg

Cans samples for seaming:

N2 Generator as an optional equipment:

How the vacuum canned food process for gas&air exhausting process:
In canning process vacuum is needed to provide a strong closure.Just adding nitrogen won't make much difference. You'd have to find some way to suck out the normal-ratio air out at the same time, or there would still be plenty of oxygen in there.
Vacuum is a measure of the extent to which air has been eliminated from the container. The amount of air that is left in the container after filling and the amount of vacuum are closely interrelated.

A strong vacuum provides the following benefits:
►It reduces stress to the can and its seams during thermal processing.
►It maintains the can ends or jar lids in a concave position giving a visual indication to the conditions of the container.
►It reduces the quantity of oxygen in the container. Fats are not going rancid, the food maintains its quality longer.
In food containers a vacuum is produced by the following methods:
Exhausting is allowing air or similar gases to escape from the food. In a sealed container oxygen is undesirable, whether it is released from food cells or is present in the form of entrapped air. Oxygen may react with the food and the interior of the can and affect the quality and nutritive value of the canned food. Other gasses, for example, carbon dioxide, should also be exhausted as much as possible. They may place undue strain on the container during the heat process as they will expand. This will be more of a concern in metal cans, where the gases will be hermetically trapped and have no means to escape.

Thermal Exhaust - This is a typical home production method.
Cans: contents of the container are heated to 170° F, 77° C, prior to sealing the container. As the contents contract during the cooling step, a vacuum is produced inside.
Jars: The same effect is produced by filling jars with hot food, and adding boiling water, broth, syrup or brine to the container.
Air bubbles may be trapped inside the jar and will raise to the top during processing, increasing headspace. This may adversely affect the closure of the jar. Run a plastic utensil (knife, spatula) around the jar, moving it up and down, so that any trapped air is released.
In commercial applications exhausting is accomplished by:
Steam Displacement - Steam is introduced into the headspace where it forces air out. When the container cools down, the steam condenses and a vacuum is produced. Filled with food, open containers are passed through an 'exhaust box' in which steam is used to expand the food by heat and expel air and other gasses.
Mechanical - A commercial method. A portion of the air in the container headspace is removed with a pump. Regardless of the exhausting method used, the container must be immediately sealed while it is still hot.
►NOTE After exhausting the metal cans should be processed at once, while still hot. Cans are never sealed cold.
Why Nitrogen needed during food canned&packaging process:
The most effective way to prevent oxygen damage is to remove and replace the oxygen with an inert gas. All those clear cello-packs of potato or corn chips, pretzels or popcorn that display their contents of salt and greasy calories so effectively on supermarket shelves are inflated with nitrogen gas. Punch a small hole in one and squeeze the gas inside onto a burning match. The flame will go out.
Nitrogen has long been used in the food packaging industry to help preserve the freshness, integrity, and quality of the delivered product. Food packaging types include: bags, bottles, cans, boxes, plastic or cardboard containers.
Manufacturers often use a Nitrogen gas purge to displace oxygen from the package before sealing it closed. The presence of oxygen introduces moisture which can deteriorate the food quality. Using Nitrogen to purge food packaging of oxygen is a safe practice widely used throughout the food industry.
Another reason that Nitrogen is often used for food packaging is to provide a pressurized atmosphere that prevents package collapse. Using N2 gas in this way helps ensure that more delicate foods, such as chips and crackers, won't get crushed in the bags where they're stored.
Packing the machine in wooden case for shipping:

http://gearpackaging.com/

Contact:Tony 

Cellphone:+86-188-1682-5234 

Telephone:+0769-8270-8461

Skype:Gearpacakaging Tony

E-mail:gearpacking@gmail.com

Automatic toothbrush paper plastic packaging machine toothbrush blister tray forming paper card sealing packing machine toothbrush packing line

Description:

Automatic toothbrush paper plastic packaging machine toothbrush blister tray forming paper card sealing packing machine toothbrush packing line

Model:GP-320B

Technical parameter:
production speed: 8-15 cycle/min
stroke range: 30-260mm
max.forming area: 300x255mm
max.forming depth: 40mm
forming heating power: 6kw
heat sealing power 3.5kw
total power: 13kw
air pressure: 0.5-0.8Mpa
air consumption: ≥0.5L
packing material: PVC PET

The machine can automatic forming toothbrush blister,droping paper card, hot sealing, cutting, converying finished products out etc.

It is used for full-sealed paper-plastic packing, for examples: daily commodity (toothbrush, shaver, nipple, stick hooks),small hardware(battery, electronics , glue), stationery(pencil sharpener, eraser, correction fluid,solid glue), Autoparts(brake, spark-plug),commecstics (lip stcik),Medicines (safflower oil,essential Balm),Toy (small car), medical instruments, food etc.

Main features 
A. Mechanical transmission, servo motor driving, encoder control, reasonable structure, easy operation.
B. 304 stainless steel frame, beautiful appearance, convenient for cleaning.
C. PLC control system, frequency speed adjust, which will help to reduce the noise and improve the running stability of the machine.
D. Photoelectrical control, auto detection.
E. Separated card feeder, which will reduce the labor force.
F. The whole machine is separately designed, it is convenient to delivery with lift.
G. To design the mould and auto feeding method according to the product shape.

Machine overview 
Blister card packing  machine is the new  equipment  which is developed by our technical department based on the mature  technology from pharmaceutical packing machinery of more than ten years, and  absorbing  the working principle of similar machine at home and abroad. It has the feature of advanced technology,complete function, reasonable working process, easy operation, and convenient maintenance.
Machine detail pictures:

Machine running in the customer's production factory

Customer inspection on scene in our workshop before delivery:

Sample pictures:

Factory working for machine process,assembling and testing:

Machine packaging and delivery:

After sales service
Guarantee: for all the machine, it claims one year for guarantee.(Excluded from the warranty are problems due to accidents, misuse , misapplication, storage damage, negligence, or modification to the Equipment or its components. ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)
Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and test the machine and also training your worker to operating the machine (The time of train depend on you worker). The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for the technician USD80 per day. also you can go to our factory to do training.
After service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible. The cost should be in your account.(as above).

http://gearpackaging.com/

Contact:Tony 

Cellphone:+86-188-1682-5234 

Telephone:+0769-8270-8461

Skype:Gearpacakaging Tony

E-mail:gearpacking@gmail.com